25 Fantastic Fudge Recipes - Chocolate Chocolate and More! (2024)

FAQs

Why won't my 2 ingredient fudge set? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Although fudge often contains chocolate, fudge is not the same as chocolate. Chocolate is a mix of cocoa solids, cocoa butter and sometimes sugar and other flavorings and is hard and brittle. Fudge is a mixture of sugar, dairy and flavorings that is cooked and cooled to form a smooth, semi-soft confection.

Chocolate: you may use semi-sweet chocolate or dark chocolate. If you want milk chocolate fudge, I suggest using a combination of milk and semi-sweet, so that it's not overly sweet. But this is up to you! You could also use semi-sweet chocolate chips, but I suggest sticking to high-quality chocolate if possible.

Don't stir!

Once the fudge reaches soft-ball stage on the candy thermometer, remove from the heat and let the temperature drop to 110°F. Keep that spoon or spatula out of the pot until this happens. If you stir too early in the process, you'll make the sugar crystals too big and end up with grainy fudge.

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

Fudge incorporates sugar, milk, butter, and other ingredients such as cocoa for chocolate fudge. The chocolatier then heats these products together until they melt. After this, the mixture is beaten during the cooling process. Think of fudge as a food consisting of crystallized sugar.

Fudge is best stored at room temperature for 2 to 3 weeks wrapped up in its original wax paper. NEVER REFRIGERATE your fudge as this will draw out the moisture and leave you with dry, crumbly fudge.

Fudge typically contains more sugar than chocolate, so it may not be the best choice for those looking to limit their sugar intake. On the other hand, dark chocolate is a good source of antioxidants and can provide health benefits when consumed in moderation.

Butter is added in the final stages to add flavor and smoothness and inhibit large crystal formation. Use unsalted butter so you can add a small amount of salt (¼ teaspoon per stick of butter) to the sugar/liquid mixture. Salt tends to stabilize the mixture and keep it from foaming as much.

Why do you put salt in fudge? Salt is great at balancing the sweetness in desserts. By way of contrasting the sugar in the sweetened condensed milk it emphasizes and balances the sweetness.

Why is fudge not creamy? ›

Sugar Crystals Formed

It's important to beat the fudge ingredients to develop the right texture, but you won't get smooth, creamy fudge if you beat it when it's too hot. Beating fudge when it's still over heat creates sugar crystals, aka the grittiness you feel in the fudge.

Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.

there is too much leftover water in the syrup and the resulting fudge is soft. To save the fudge, put it in a saucepan with 15 to 30 ml (1 or 2 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil until the thermometer reaches 114 to 115 °C (237 to 239 °F).

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

The most common culprit behind unset fudge is inaccurate temperature control. If the sugar mixture hasn't reached the correct temperature, your fudge won't set. Ensure you use a reliable candy thermometer and follow temperature guidelines meticulously to achieve the desired consistency.